The YE50 is a 8-core, sealed surface contact. Complete with integral resistors, they are chosen by core selection. ~400mm of fly lead is provided on the contact.
EOL Resistors: 1k, 2k2, 4k1, 4k7, 5k6.
Alm Resistors: 1k, 2k2, 4k1, 4k7, 5k6, 6k8.
These resistors cover the majority of leading panel manufacturers including Honeywell, Texecom, HKC, Risco etc. YE50 is unsuitable for 4-wire installations. The integral resistors must be used in the circuit.
Both contact and magnet are 67x14x13mm. Operating gap is 20mm approx.
A hard wearing resin is used to seal the contact, providing protection against both outside attack and environmental factors.
Two YE50 contacts can share a zone, depending on the configuration of the alarm panel (see instructions).
Fitting screws are provided.
- Resin sealed against outside attack
- Operating gap: ~20mm
- 400mm Fly lead
- Supplied with fitting screws
- Integral resistors
- Fitting screws provided
