Skip to main content
Norbain SD
Secure Checkout
Easy Online Ordering
Competitive Pricing
Next Day & Timed Delivery Available
Industry-Leading Support
All Articles

Why Installers Still Choose HIGHWIRE After Two Decades

Share
Why Installers Still Choose HIGHWIRE After Two Decades

Veracity HIGHWIRE turns existing coaxial cable into an Ethernet and PoE link, so installers can upgrade analogue CCTV to IP without re-cabling. Here is why it is still the go-to choice after 20 years, including in fire-compartmented and asbestos-risk buildings.

Upgrading an analogue CCTV system to IP sounds simple until you look at the cabling. New Ethernet runs mean lifting ceilings, drilling through walls and, increasingly, reopening fire-stopped penetrations. Veracity HIGHWIRE removes that problem by turning the coaxial cable already in the building into a full Ethernet connection, so modern IP cameras and network devices can run over infrastructure that is already there.

First developed in 2005 and launched commercially in 2006, HIGHWIRE helped pioneer Ethernet over Coax (EoC) at the moment the security industry began moving from analogue video to network surveillance. Twenty years on, installers are still reaching for it. Here is why.

What is Ethernet over Coax?

Ethernet over Coax is a way of sending standard network data (and, with the right units, Power over Ethernet) along the coaxial cable originally installed for analogue CCTV. A HIGHWIRE unit sits at each end of the coax. The link sets itself up automatically, and to the IP camera it looks just like an ordinary network cable.

According to Veracity, the single-channel HIGHWIRE delivers a full-duplex 100BASE-T connection over up to 500 metres of RG-11 cable, or 280 metres of CCTV-grade RG-59. No IP address, MAC address or configuration is required.

Why HIGHWIRE Has Stood the Test of Time

HIGHWIRE has been trusted by the industry for two decades because it solves one of the biggest challenges security installers face today: how to deploy modern IP devices without replacing established cabling infrastructure.

Reduce disruption:

  • Reuse legacy coax cabling
  • Avoid invasive re-cabling work
  • Complete upgrades faster

Lower costs:

  • Less labour on site
  • Fewer materials
  • Reduced project risk

Proven reliability:

  • Hundreds of thousands of units deployed, according to Veracity
  • Used on projects worldwide
  • Trusted for two decades

Supports modern IP requirements:

  • PoE over coax
  • High-resolution IP cameras
  • Long-distance transmission
  • Multi-camera applications

"The reason HIGHWIRE remains relevant after twenty years is that many upgrade projects aren't starting with a blank sheet of paper. Installers are often working in live buildings with existing services, tight budgets and increasing compliance requirements. Where suitable coax is already in place, HIGHWIRE provides a practical way to modernise surveillance systems without creating unnecessary work or complexity."
Wes Ludlam, VeracityUK Country Sales Manager (Product)

The HIGHWIRE Range at a Glance

The family has grown well beyond the original single-channel unit. Depending on the job, installers can choose:

  • HIGHWIRE for a straightforward Ethernet over Coax link powered from a legacy 12VDC or 24VAC supply.
  • HIGHWIRE Powerstar for PoE over coax, delivering up to 25W to the camera so no local power supply is needed. Veracity's SafeView display confirms network and power status at a glance.
  • HIGHWIRE Longstar for very long runs, with unrestricted 100BASE-T and PoE over 1.4km of RG-11. It is certified to BS EN 50121-4 for rail and metro.

The Veracity HIGHWIRE range of Ethernet over Coax units

Fire Compartmented Upgrades Without Re-cabling

Many organisations are reviewing fire compartmentation across their buildings as part of wider fire safety programmes. Schools, healthcare facilities, commercial properties and public-sector estates are all assessing how services pass through fire-rated walls, floors and ceilings, to make sure building integrity is maintained.

For security installers, that adds a layer of complexity to any analogue to IP CCTV upgrade. Traditionally, migrating to IP surveillance means pulling new Ethernet cable. Where those routes cross fire compartments, extra fire-stopping work may be needed to stay compliant. That can bring in specialist contractors, push up project costs and disrupt building owners and occupants.

Why Does Fire Compartmentation Matter?

Fire stopping is a passive fire protection practice used to seal openings, gaps and joints in fire-resistant walls, floors and ceilings.

Buildings are divided into compartments to help stop fire, smoke and hot gases from spreading. When services pass through these barriers, appropriate fire-stopping measures are needed to keep them intact. Install new network cabling and those measures may need to be reassessed and updated. That work can be costly and inconvenient, and it must be carried out by suitably competent specialists.

How HIGHWIRE Simplifies the Process

Rather than replacing installed cabling, HIGHWIRE lets analogue coaxial cable be repurposed for Ethernet transmission.

Where the coax has already been taken into account during previous fire-stopping works, keeping those cable routes can help avoid the complications that come with installing new infrastructure. By using the cabling already in place, installers can modernise surveillance systems while reducing labour and lowering overall project risk.

Additional Benefits in Asbestos Environments

HIGHWIRE can also ease the challenge of upgrading surveillance in buildings where asbestos may be present.

Re-cabling usually means drilling, pulling cable and disturbing the building fabric. Without the right precautions, all of these may increase the risk of releasing hazardous asbestos fibres. By repurposing installed coaxial cabling, HIGHWIRE can help minimise invasive installation work and reduce the associated risks, complexity and cost of the upgrade.

Frequently Asked Questions

What is Veracity HIGHWIRE?

HIGHWIRE is a range of Ethernet over Coax devices from Veracity. It converts existing coaxial cable into a network connection so IP cameras and other network devices can be installed without running new Ethernet cable.

Can I upgrade analogue CCTV to IP without re-cabling?

Yes, where suitable coax is already in place. A HIGHWIRE unit at each end of the existing cable creates an Ethernet link, so analogue cameras can be swapped for IP cameras while the original cable stays where it is.

How far can HIGHWIRE transmit over coax?

Veracity quotes up to 500 metres over RG-11 and 280 metres over CCTV-grade RG-59 for the standard HIGHWIRE. HIGHWIRE Longstar extends this to 1.4km with PoE on RG-11.

Can HIGHWIRE power an IP camera over coax?

Yes. HIGHWIRE Powerstar sends PoE down the coaxial cable and can deliver up to 25W to the camera, which removes the need for a local power supply at the camera position.

Does HIGHWIRE need any configuration?

No. The link is established automatically once a unit is connected at each end, and it needs no IP or MAC address.

How does reusing coax help with fire compartmentation?

New Ethernet cable passing through fire-rated walls and floors may mean fire-stopping has to be reassessed and redone by specialists. Reusing coax routes that were already considered during earlier fire-stopping works can help avoid that extra work.

Is HIGHWIRE suitable for buildings with asbestos?

It can help. Because HIGHWIRE reuses installed cable, it cuts down on the drilling and disturbance that re-cabling involves, which can reduce the risks associated with working around asbestos. Normal asbestos precautions still apply.

Talk to Norbain About HIGHWIRE

Planning an analogue to IP upgrade where existing coax is in place? Browse the full Veracity range, or get in touch with your account manager to talk through the right HIGHWIRE solution for your project.