Knight Grade 2, 8-Core Armoured Roller Shutter Contact With Resistors, 1 Metre

The F10CMULTI is a heavy duty roller shutter contact, sealed against outside attack by a hard wearing resin. 1 metre of 8-core fly lead is provided, encased in a steel armoured sleeve. The sleeve itself is capped with a grommet for ease of installation to junction boxes etc. This contact comes complete with integral resistors, configured by core selection: EOL Resistors: 1k, 2k2, 4k1, 4k7, 5k6. Alm Resistors: 1k, 2k2, 4k1, 4k7, 5k6, 6k8. These resistors cover the majority of leading panel manufacturers including Honeywell, Texecom, HKC, Risco etc. Two F10CMULTI contacts can share a zone, depending on the configuration of the alarm panel (see instructions). Note: The integral resistors MUST be used - this contact cannot be wired 4-wire / traditional. For this purpose, use part code F10A or F10C. Contact dimensions are 150x40x15mm and the magnet is 60x75x32mm overall. This contact operates at a gap of approximately 50mm. Available at Grade 3 - use part code YF10C - Resin sealed against outside attack - Operating gap: ~50mm - 1 metre Armoured fly lead - Integral resistors - Aluminium construction - Grommet fitting